IWDC

TAPRITE Wrench CO2 nut 1-1/8 in hex offset CGA320

Category Wrenches
740-18NB.HG
IWDC

TAPRITE Wrench CO2 nut 1-1/8 in hex offset CGA320

Item Code: 740-18NB.HG
The Taprite 740-18NB Fits 1-1/8" CO2 beer regulator nuts with a closed-end. Made of Zinc plated steel so it is Rust resistant. This wrench is used for tightening your CO2 regulator or Nitrogen regulator connecting nut to the gas cylinder, or for removing the nut. Designed to stay in place with the regulator for the convenience of the service technician.
Category Wrenches

Description

The Taprite 740-18NB Fits 1-1/8" CO2 beer regulator nuts with a closed-end. Made of Zinc plated steel so it is Rust resistant. This wrench is used for tightening your CO2 regulator or Nitrogen regulator connecting nut to the gas cylinder, or for removing the nut. Designed to stay in place with the regulator for the convenience of the service technician.
- +
Add to quick list
Compare
IWDC

TAPRITE Wrench CO2 nut 1-1/8 in hex offset CGA320

Category Wrenches
740-18NB.HG
IWDC

TAPRITE Wrench CO2 nut 1-1/8 in hex offset CGA320

Item Code: 740-18NB.HG
The Taprite 740-18NB Fits 1-1/8" CO2 beer regulator nuts with a closed-end. Made of Zinc plated steel so it is Rust resistant. This wrench is used for tightening your CO2 regulator or Nitrogen regulator connecting nut to the gas cylinder, or for removing the nut. Designed to stay in place with the regulator for the convenience of the service technician.
Category Wrenches

Description

The Taprite 740-18NB Fits 1-1/8" CO2 beer regulator nuts with a closed-end. Made of Zinc plated steel so it is Rust resistant. This wrench is used for tightening your CO2 regulator or Nitrogen regulator connecting nut to the gas cylinder, or for removing the nut. Designed to stay in place with the regulator for the convenience of the service technician.
- +
Add to quick list
Compare
SEARCH ×