144-00.HG

Series Airco style 144 Cutting Tip Oxygen/Acetylene One Piece Size: 00

Item Code: 144-00.HG

The Weldmark® by Victor® Acetylene Airco® style 144 series Oxy-Fuel Size 00 Cutting Tip has a cutting capacity of 0.125 inches. This general purpose Airco® series tip is one piece. It is ideal for hand and machine torch cutting on 4700 series machine torches. It is compatible with 3790, 4800, 5700 and 5800 cutting attachments, and is capable of cutting 21-24 inches per minute. It's designed for use with Acetylene, with a max Acetylene pressure of 1.5 and a max cutting oxygen pressure of 30. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

Category Torches, Handles, & Cutting Attachments

General purpose, Airco style 144 for hand cutting applications over wide range of plate surface conditions
For use with oxygen and acetylene
Speed is 21 to 24 inches per minute
Drill size 69 (.029)
4700 Series Machine Torches
Warning: At no time should the withdrawl rate of an individual acetylene cylinder exceed 1/7 of the cylinder contents per hour

Description

The Weldmark® by Victor® Acetylene Airco® style 144 series Oxy-Fuel Size 00 Cutting Tip has a cutting capacity of 0.125 inches. This general purpose Airco® series tip is one piece. It is ideal for hand and machine torch cutting on 4700 series machine torches. It is compatible with 3790, 4800, 5700 and 5800 cutting attachments, and is capable of cutting 21-24 inches per minute. It's designed for use with Acetylene, with a max Acetylene pressure of 1.5 and a max cutting oxygen pressure of 30. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

Series Airco style 144 Cutting Tip Oxygen/Acetylene One Piece Size: 00

Item Code: 144-00.HG

The Weldmark® by Victor® Acetylene Airco® style 144 series Oxy-Fuel Size 00 Cutting Tip has a cutting capacity of 0.125 inches. This general purpose Airco® series tip is one piece. It is ideal for hand and machine torch cutting on 4700 series machine torches. It is compatible with 3790, 4800, 5700 and 5800 cutting attachments, and is capable of cutting 21-24 inches per minute. It's designed for use with Acetylene, with a max Acetylene pressure of 1.5 and a max cutting oxygen pressure of 30. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

Category Torches, Handles, & Cutting Attachments

General purpose, Airco style 144 for hand cutting applications over wide range of plate surface conditions
For use with oxygen and acetylene
Speed is 21 to 24 inches per minute
Drill size 69 (.029)
4700 Series Machine Torches
Warning: At no time should the withdrawl rate of an individual acetylene cylinder exceed 1/7 of the cylinder contents per hour

Description

The Weldmark® by Victor® Acetylene Airco® style 144 series Oxy-Fuel Size 00 Cutting Tip has a cutting capacity of 0.125 inches. This general purpose Airco® series tip is one piece. It is ideal for hand and machine torch cutting on 4700 series machine torches. It is compatible with 3790, 4800, 5700 and 5800 cutting attachments, and is capable of cutting 21-24 inches per minute. It's designed for use with Acetylene, with a max Acetylene pressure of 1.5 and a max cutting oxygen pressure of 30. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

SEARCH ×

Items ()

Item	Description	Item Code	Qty
	Product Name {{product.name}}	Item Code {{product.sku}}

Clear All

Details

{{product.brand_name}}

{{product.item_name}}

Item Code: {{product.item_sku}} Original SKU: {{product.original_sku}}

Customer Product Code : {{product.customer_product_code}}

Category {{product.category_name}}

Maximum order quantity {{ product.item_maximum_order }}

{{ product.display_uom_price }} / {{ product.display_uom }}

{{attribute.name}}

{{attribute.value}}

{{attribute.name}}

{{attribute.value}}

${{product.item_name}}$

{{{product.item_description}}}

{{selling_point}}

	Location	Stock
	{{location.warehouse}}	{{location.quantity}}

Want To Swap ?

{{reason}}

${{product.item_name}}$

{{product.item_name}}

Item Code: {{product.item_sku}}

Maximum order quantity {{ product.item_maximum_order }}

Call for price

- +

{{reason}}

${{selectproduct.item_name}}$

{{selectproduct.item_name}}

Item Code: {{ selectproduct.item_sku }}

Maximum order quantity {{ selectproduct.item_maximum_order }}

Call for price

- +