2-3-GPN.HG

Series 3-GPN Cutting Tip Oxygen/Natural Gas, Propane Two Piece with Spline Insert Size: 2

Item Code: 2-3-GPN.HG

The Weldmark® by Victor® 3-GPN series Oxy-Fuel Size 2 Cutting Tip has a 1-1/2 inch cutting capacity. This general purpose 3-GPN series tip is two pieces with a spline insert. It is ideal for hand and machine torch cutting. It is compatible with CA1350/51/52, CA1260 and CA411-3 cutting attachments, and is capable of cutting 12-18 inches per minute with an average kerf width of 0.09". It's designed for use with Natural Gas or Propane, with a max Propane pressure of 9 and a max oxygen cutting pressure of 45. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

Category Tips & Nozzles

General purpose, Victor style 3-GPN size 2 for hand and machine torch cutting
For use with oxygen, propane or natural gas
Speed is 12 to 18 inches per minute
Kerf width is .09"
Kerf Width 0.09 in. average
14-18 in./min., 12-16 in./min.

Description

The Weldmark® by Victor® 3-GPN series Oxy-Fuel Size 2 Cutting Tip has a 1-1/2 inch cutting capacity. This general purpose 3-GPN series tip is two pieces with a spline insert. It is ideal for hand and machine torch cutting. It is compatible with CA1350/51/52, CA1260 and CA411-3 cutting attachments, and is capable of cutting 12-18 inches per minute with an average kerf width of 0.09". It's designed for use with Natural Gas or Propane, with a max Propane pressure of 9 and a max oxygen cutting pressure of 45. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

Series 3-GPN Cutting Tip Oxygen/Natural Gas, Propane Two Piece with Spline Insert Size: 2

Item Code: 2-3-GPN.HG

The Weldmark® by Victor® 3-GPN series Oxy-Fuel Size 2 Cutting Tip has a 1-1/2 inch cutting capacity. This general purpose 3-GPN series tip is two pieces with a spline insert. It is ideal for hand and machine torch cutting. It is compatible with CA1350/51/52, CA1260 and CA411-3 cutting attachments, and is capable of cutting 12-18 inches per minute with an average kerf width of 0.09". It's designed for use with Natural Gas or Propane, with a max Propane pressure of 9 and a max oxygen cutting pressure of 45. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

Category Tips & Nozzles

General purpose, Victor style 3-GPN size 2 for hand and machine torch cutting
For use with oxygen, propane or natural gas
Speed is 12 to 18 inches per minute
Kerf width is .09"
Kerf Width 0.09 in. average
14-18 in./min., 12-16 in./min.

Description

The Weldmark® by Victor® 3-GPN series Oxy-Fuel Size 2 Cutting Tip has a 1-1/2 inch cutting capacity. This general purpose 3-GPN series tip is two pieces with a spline insert. It is ideal for hand and machine torch cutting. It is compatible with CA1350/51/52, CA1260 and CA411-3 cutting attachments, and is capable of cutting 12-18 inches per minute with an average kerf width of 0.09". It's designed for use with Natural Gas or Propane, with a max Propane pressure of 9 and a max oxygen cutting pressure of 45. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

SEARCH ×

Items ()

Item	Description	Item Code	Qty
	Product Name {{product.name}}	Item Code {{product.sku}}

Clear All

Details

{{product.brand_name}}

{{product.item_name}}

Item Code: {{product.item_sku}} Original SKU: {{product.original_sku}}

Customer Product Code : {{product.customer_product_code}}

Category {{product.category_name}}

Maximum order quantity {{ product.item_maximum_order }}

{{ product.display_uom_price }} / {{ product.display_uom }}

{{attribute.name}}

{{attribute.value}}

{{attribute.name}}

{{attribute.value}}

${{product.item_name}}$

{{{product.item_description}}}

{{selling_point}}

	Location	Stock
	{{location.warehouse}}	{{location.quantity}}

Want To Swap ?

{{reason}}

${{product.item_name}}$

{{product.item_name}}

Item Code: {{product.item_sku}}

Maximum order quantity {{ product.item_maximum_order }}

Call for price

- +

{{reason}}

${{selectproduct.item_name}}$

{{selectproduct.item_name}}

Item Code: {{ selectproduct.item_sku }}

Maximum order quantity {{ selectproduct.item_maximum_order }}

Call for price

- +