4202-7.HG

Series Purox 4202 Cutting Tip Oxygen/Acetylene One Piece Size: 7

Item Code: 4202-7.HG

The Weldmark® by Victor® Acetylene Purox style 4202 series Oxy-Fuel Size 7 Cutting Tip has a 4 inch cutting capacity. This general purpose Purox 4202 series tip is one piece. It is ideal for hand and machine torch cutting, with Type E hand torches and C-205 machine torches. It is compatible with CW-200/202/300 cutting attachments, and is capable of cutting 10-12 or 8-10 inches per minute with an average kerf width of 0.095-0.110". It's designed for use with Acetylene. The max Acetylene pressure is 12 and the max oxygen cutting pressure is 73. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

Category Tips & Nozzles

General purpose, Purox style 4202 size 7 for hand and machine torch cutting
For use with oxygen and acetylene
Sufficient for beveling
Speed is 8 to 12 inches per minute
Kerf width is .095" to .110"
Drill size for preheat (68) and for cutting (50)

Description

The Weldmark® by Victor® Acetylene Purox style 4202 series Oxy-Fuel Size 7 Cutting Tip has a 4 inch cutting capacity. This general purpose Purox 4202 series tip is one piece. It is ideal for hand and machine torch cutting, with Type E hand torches and C-205 machine torches. It is compatible with CW-200/202/300 cutting attachments, and is capable of cutting 10-12 or 8-10 inches per minute with an average kerf width of 0.095-0.110". It's designed for use with Acetylene. The max Acetylene pressure is 12 and the max oxygen cutting pressure is 73. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

Series Purox 4202 Cutting Tip Oxygen/Acetylene One Piece Size: 7

Item Code: 4202-7.HG

The Weldmark® by Victor® Acetylene Purox style 4202 series Oxy-Fuel Size 7 Cutting Tip has a 4 inch cutting capacity. This general purpose Purox 4202 series tip is one piece. It is ideal for hand and machine torch cutting, with Type E hand torches and C-205 machine torches. It is compatible with CW-200/202/300 cutting attachments, and is capable of cutting 10-12 or 8-10 inches per minute with an average kerf width of 0.095-0.110". It's designed for use with Acetylene. The max Acetylene pressure is 12 and the max oxygen cutting pressure is 73. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

Category Tips & Nozzles

General purpose, Purox style 4202 size 7 for hand and machine torch cutting
For use with oxygen and acetylene
Sufficient for beveling
Speed is 8 to 12 inches per minute
Kerf width is .095" to .110"
Drill size for preheat (68) and for cutting (50)

Description

The Weldmark® by Victor® Acetylene Purox style 4202 series Oxy-Fuel Size 7 Cutting Tip has a 4 inch cutting capacity. This general purpose Purox 4202 series tip is one piece. It is ideal for hand and machine torch cutting, with Type E hand torches and C-205 machine torches. It is compatible with CW-200/202/300 cutting attachments, and is capable of cutting 10-12 or 8-10 inches per minute with an average kerf width of 0.095-0.110". It's designed for use with Acetylene. The max Acetylene pressure is 12 and the max oxygen cutting pressure is 73. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

SEARCH ×

Items ()

Item	Description	Item Code	Qty
	Product Name {{product.name}}	Item Code {{product.sku}}

Clear All

Details

{{product.brand_name}}

{{product.item_name}}

Item Code: {{product.item_sku}} Original SKU: {{product.original_sku}}

Customer Product Code : {{product.customer_product_code}}

Category {{product.category_name}}

Maximum order quantity {{ product.item_maximum_order }}

{{ product.display_uom_price }} / {{ product.display_uom }}

{{attribute.name}}

{{attribute.value}}

{{attribute.name}}

{{attribute.value}}

${{product.item_name}}$

{{{product.item_description}}}

{{selling_point}}

	Location	Stock
	{{location.warehouse}}	{{location.quantity}}

Want To Swap ?

{{reason}}

${{product.item_name}}$

{{product.item_name}}

Item Code: {{product.item_sku}}

Maximum order quantity {{ product.item_maximum_order }}

Call for price

- +

{{reason}}

${{selectproduct.item_name}}$

{{selectproduct.item_name}}

Item Code: {{ selectproduct.item_sku }}

Maximum order quantity {{ selectproduct.item_maximum_order }}

Call for price

- +