Weldmark

Weldmark WEM 4202-4 Series Purox 4202 One Piece Oxygen Acetylene Cutting Tip 4 Inch Size 1/2 Inch Cutting Capacity Copper

Category Tips & Nozzles
4202-4.HG
Weldmark

Weldmark WEM 4202-4 Series Purox 4202 One Piece Oxygen Acetylene Cutting Tip 4 Inch Size 1/2 Inch Cutting Capacity Copper

Item Code: 4202-4.HG
The Weldmark® by Victor® Acetylene Purox style 4202 series Oxy-Fuel Size 4 Cutting Tip has a 1/2 inch cutting capacity. This general purpose Purox 4202 series tip is one piece. It is ideal for hand and machine torch cutting, with Type E hand torches and C-205 machine torches. It is compatible with CW-200/202/300 cutting attachments, and is capable of cutting 23-27 or 18-22 inches per minute with an average kerf width of 0.060-0.065". It's designed for use with Acetylene. The max Acetylene pressure is 10 and the max oxygen cutting pressure is 35. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.
Category Tips & Nozzles
  • General purpose, Purox style 4202 size 4 for hand and machine torch cutting
  • For use with oxygen and acetylene
  • Sufficient for beveling
  • Speed is 18 to 27 inches per minute
  • Kerf width is .060" to .065"
  • Drill size for preheat (73) and for cutting (60)

Fetching product details


Description

The Weldmark® by Victor® Acetylene Purox style 4202 series Oxy-Fuel Size 4 Cutting Tip has a 1/2 inch cutting capacity. This general purpose Purox 4202 series tip is one piece. It is ideal for hand and machine torch cutting, with Type E hand torches and C-205 machine torches. It is compatible with CW-200/202/300 cutting attachments, and is capable of cutting 23-27 or 18-22 inches per minute with an average kerf width of 0.060-0.065". It's designed for use with Acetylene. The max Acetylene pressure is 10 and the max oxygen cutting pressure is 35. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

Specifications

  • Acetylene Consumption : 9-12 cu ft/hr
  • Brand : Weldmark
  • Category : Tips & Nozzles
  • Country of Origin : China
  • Cutting Capacity : 1/2 in
  • Cutting Oxygen Consumption Range : 55-75 cu ft/hr
  • Cutting Speed : 18-27 ipm
  • Cutting Tip Material : Copper
  • Cutting Tip Series : Preheating
  • Cutting Type : One Piece
  • Fuel : Acetylene
  • GSA Approved : Acetylene
  • Heater Type : Medium Preheat
  • Height : 0.8 in
  • Item Length : 3.4 in
  • Item Width : 0.8 in
  • Kerf Width : 0.06-0.065 in
  • Maximum Flow Rate Oxygen : 75 cu ft/min
  • Maximum Operating Pressure : 10 psig
  • Minimum Flow Rate Oxygen : 55 cu ft/min
  • Minimum Operating Pressure : 20 psig
  • Number of Holes : 6
  • Oxy Fuel Torch Series : C-205
  • Process : OFC
  • Prop 65 : Yes
  • Size : 4
Add to quick list
Compare
Weldmark

Weldmark WEM 4202-4 Series Purox 4202 One Piece Oxygen Acetylene Cutting Tip 4 Inch Size 1/2 Inch Cutting Capacity Copper

Category Tips & Nozzles
4202-4.HG
Weldmark

Weldmark WEM 4202-4 Series Purox 4202 One Piece Oxygen Acetylene Cutting Tip 4 Inch Size 1/2 Inch Cutting Capacity Copper

Item Code: 4202-4.HG
The Weldmark® by Victor® Acetylene Purox style 4202 series Oxy-Fuel Size 4 Cutting Tip has a 1/2 inch cutting capacity. This general purpose Purox 4202 series tip is one piece. It is ideal for hand and machine torch cutting, with Type E hand torches and C-205 machine torches. It is compatible with CW-200/202/300 cutting attachments, and is capable of cutting 23-27 or 18-22 inches per minute with an average kerf width of 0.060-0.065". It's designed for use with Acetylene. The max Acetylene pressure is 10 and the max oxygen cutting pressure is 35. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.
Category Tips & Nozzles
  • General purpose, Purox style 4202 size 4 for hand and machine torch cutting
  • For use with oxygen and acetylene
  • Sufficient for beveling
  • Speed is 18 to 27 inches per minute
  • Kerf width is .060" to .065"
  • Drill size for preheat (73) and for cutting (60)

Fetching product details


Description

The Weldmark® by Victor® Acetylene Purox style 4202 series Oxy-Fuel Size 4 Cutting Tip has a 1/2 inch cutting capacity. This general purpose Purox 4202 series tip is one piece. It is ideal for hand and machine torch cutting, with Type E hand torches and C-205 machine torches. It is compatible with CW-200/202/300 cutting attachments, and is capable of cutting 23-27 or 18-22 inches per minute with an average kerf width of 0.060-0.065". It's designed for use with Acetylene. The max Acetylene pressure is 10 and the max oxygen cutting pressure is 35. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

Specifications

  • Acetylene Consumption : 9-12 cu ft/hr
  • Brand : Weldmark
  • Category : Tips & Nozzles
  • Country of Origin : China
  • Cutting Capacity : 1/2 in
  • Cutting Oxygen Consumption Range : 55-75 cu ft/hr
  • Cutting Speed : 18-27 ipm
  • Cutting Tip Material : Copper
  • Cutting Tip Series : Preheating
  • Cutting Type : One Piece
  • Fuel : Acetylene
  • GSA Approved : Acetylene
  • Heater Type : Medium Preheat
  • Height : 0.8 in
  • Item Length : 3.4 in
  • Item Width : 0.8 in
  • Kerf Width : 0.06-0.065 in
  • Maximum Flow Rate Oxygen : 75 cu ft/min
  • Maximum Operating Pressure : 10 psig
  • Minimum Flow Rate Oxygen : 55 cu ft/min
  • Minimum Operating Pressure : 20 psig
  • Number of Holes : 6
  • Oxy Fuel Torch Series : C-205
  • Process : OFC
  • Prop 65 : Yes
  • Size : 4
Add to quick list
Compare
SEARCH ×