Weldmark

Weldmark WEM 6290-5 Harris Series 6290 Size 5 One Piece Oxygen Acetylene Cutting Tip Copper 8 Inch Capacity

Category Tips & Nozzles
6290-5.HG
Weldmark

Weldmark WEM 6290-5 Harris Series 6290 Size 5 One Piece Oxygen Acetylene Cutting Tip Copper 8 Inch Capacity

Item Code: 6290-5.HG
The Weldmark® by Victor® Acetylene Harris style 6290 series Oxy-Fuel Size 5 Cutting Tip has a 6-8 inch cutting capacity. This general purpose Harris 6290 series tip is one piece. It is ideal for hand and machine torch cutting. It is capable of cutting 8-11 inches per minute. It's designed for use with Acetylene. The max Acetylene pressure range is 12-15 and the max oxygen cutting pressure is 80. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.
Category Tips & Nozzles

Fetching product details


Description

The Weldmark® by Victor® Acetylene Harris style 6290 series Oxy-Fuel Size 5 Cutting Tip has a 6-8 inch cutting capacity. This general purpose Harris 6290 series tip is one piece. It is ideal for hand and machine torch cutting. It is capable of cutting 8-11 inches per minute. It's designed for use with Acetylene. The max Acetylene pressure range is 12-15 and the max oxygen cutting pressure is 80. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

Specifications

  • Acetylene Pressure : 12 psig
  • Brand : Weldmark
  • Category : Tips & Nozzles
  • Country Of Origin : China
  • Cutting Capacity : 6-8 in
  • Cutting Oxygen Flow Rate : 650-800 cu ft/min
  • Cutting Oxygen Pressure : 65-80 psig
  • Cutting Tip Diameter : 0.9 in
  • Cutting Tip Length : 3.2 in
  • Cutting Tip Material : Copper
  • Cutting Type : One Piece
  • Fuel : Acetylene
  • GSA Approved : Acetylene
  • Heater Type : Medium Preheat
  • Number of Holes : 6
  • Process : OFC
  • Prop 65 : Yes
Add to quick list
Compare
Weldmark

Weldmark WEM 6290-5 Harris Series 6290 Size 5 One Piece Oxygen Acetylene Cutting Tip Copper 8 Inch Capacity

Category Tips & Nozzles
6290-5.HG
Weldmark

Weldmark WEM 6290-5 Harris Series 6290 Size 5 One Piece Oxygen Acetylene Cutting Tip Copper 8 Inch Capacity

Item Code: 6290-5.HG
The Weldmark® by Victor® Acetylene Harris style 6290 series Oxy-Fuel Size 5 Cutting Tip has a 6-8 inch cutting capacity. This general purpose Harris 6290 series tip is one piece. It is ideal for hand and machine torch cutting. It is capable of cutting 8-11 inches per minute. It's designed for use with Acetylene. The max Acetylene pressure range is 12-15 and the max oxygen cutting pressure is 80. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.
Category Tips & Nozzles

Fetching product details


Description

The Weldmark® by Victor® Acetylene Harris style 6290 series Oxy-Fuel Size 5 Cutting Tip has a 6-8 inch cutting capacity. This general purpose Harris 6290 series tip is one piece. It is ideal for hand and machine torch cutting. It is capable of cutting 8-11 inches per minute. It's designed for use with Acetylene. The max Acetylene pressure range is 12-15 and the max oxygen cutting pressure is 80. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

Specifications

  • Acetylene Pressure : 12 psig
  • Brand : Weldmark
  • Category : Tips & Nozzles
  • Country Of Origin : China
  • Cutting Capacity : 6-8 in
  • Cutting Oxygen Flow Rate : 650-800 cu ft/min
  • Cutting Oxygen Pressure : 65-80 psig
  • Cutting Tip Diameter : 0.9 in
  • Cutting Tip Length : 3.2 in
  • Cutting Tip Material : Copper
  • Cutting Type : One Piece
  • Fuel : Acetylene
  • GSA Approved : Acetylene
  • Heater Type : Medium Preheat
  • Number of Holes : 6
  • Process : OFC
  • Prop 65 : Yes
Add to quick list
Compare
SEARCH ×

Search