Weldmark

Weldmark WEM 6290-1 Harris Style 6290 One Piece Oxygen Acetylene Cutting Tip 1 Inch Capacity Medium Preheat Copper

Category Tips & Nozzles
6290-1.HG
Weldmark

Weldmark WEM 6290-1 Harris Style 6290 One Piece Oxygen Acetylene Cutting Tip 1 Inch Capacity Medium Preheat Copper

Item Code: 6290-1.HG
The Weldmark® by Victor® Acetylene Harris style 6290 series Oxy-Fuel Size 1 Cutting Tip has a 5/8-1 inch cutting capacity. This general purpose Harris 6290 series tip is one piece. It is ideal for hand and machine torch cutting. It is capable of cutting 20-24 inches per minute. It's designed for use with Acetylene. The max Acetylene pressure range is 5-15 and the max oxygen cutting pressure is 40. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.
Category Tips & Nozzles
  • General purpose, Harris style 6290 size 1 for hand and machine torch cutting
  • for use with oxygen and acetylene
  • Speed is 20 to 24 inches per minute
  • Drill size 56
  • Medium preheat
  • Warning: At no time should the withdrawl rate of an individual acetylene cylinder exceed 1/7 of the cylinder contents per hour

Fetching product details


Description

The Weldmark® by Victor® Acetylene Harris style 6290 series Oxy-Fuel Size 1 Cutting Tip has a 5/8-1 inch cutting capacity. This general purpose Harris 6290 series tip is one piece. It is ideal for hand and machine torch cutting. It is capable of cutting 20-24 inches per minute. It's designed for use with Acetylene. The max Acetylene pressure range is 5-15 and the max oxygen cutting pressure is 40. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

Specifications

  • Acetylene Consumption : 15-25 cu ft/hr
  • Acetylene Pressure : 5 psig
  • Brand : Weldmark
  • Category : Tips & Nozzles
  • Country of Origin : China
  • Cutting Capacity : 5/8-1 in
  • Cutting Oxygen Consumption Range : 100-110 cu ft/hr
  • Cutting Oxygen Pressure : 35-40 psig
  • Cutting Speed : 20-24 ipm
  • Cutting Tip Material : Copper
  • Cutting Tip Series : 6290
  • Cutting Type : One Piece
  • Fuel : Acetylene
  • GSA Approved : Acetylene
  • Heater Type : Medium Preheat
  • Height : 0.9 in
  • Item Length : 3.2 in
  • Item Width : 0.9 in
  • Model Number : 6290
  • Number of Holes : 6
  • Process : OFC
  • Size : 1
Add to quick list
Compare
Weldmark

Weldmark WEM 6290-1 Harris Style 6290 One Piece Oxygen Acetylene Cutting Tip 1 Inch Capacity Medium Preheat Copper

Category Tips & Nozzles
6290-1.HG
Weldmark

Weldmark WEM 6290-1 Harris Style 6290 One Piece Oxygen Acetylene Cutting Tip 1 Inch Capacity Medium Preheat Copper

Item Code: 6290-1.HG
The Weldmark® by Victor® Acetylene Harris style 6290 series Oxy-Fuel Size 1 Cutting Tip has a 5/8-1 inch cutting capacity. This general purpose Harris 6290 series tip is one piece. It is ideal for hand and machine torch cutting. It is capable of cutting 20-24 inches per minute. It's designed for use with Acetylene. The max Acetylene pressure range is 5-15 and the max oxygen cutting pressure is 40. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.
Category Tips & Nozzles
  • General purpose, Harris style 6290 size 1 for hand and machine torch cutting
  • for use with oxygen and acetylene
  • Speed is 20 to 24 inches per minute
  • Drill size 56
  • Medium preheat
  • Warning: At no time should the withdrawl rate of an individual acetylene cylinder exceed 1/7 of the cylinder contents per hour

Fetching product details


Description

The Weldmark® by Victor® Acetylene Harris style 6290 series Oxy-Fuel Size 1 Cutting Tip has a 5/8-1 inch cutting capacity. This general purpose Harris 6290 series tip is one piece. It is ideal for hand and machine torch cutting. It is capable of cutting 20-24 inches per minute. It's designed for use with Acetylene. The max Acetylene pressure range is 5-15 and the max oxygen cutting pressure is 40. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

Specifications

  • Acetylene Consumption : 15-25 cu ft/hr
  • Acetylene Pressure : 5 psig
  • Brand : Weldmark
  • Category : Tips & Nozzles
  • Country of Origin : China
  • Cutting Capacity : 5/8-1 in
  • Cutting Oxygen Consumption Range : 100-110 cu ft/hr
  • Cutting Oxygen Pressure : 35-40 psig
  • Cutting Speed : 20-24 ipm
  • Cutting Tip Material : Copper
  • Cutting Tip Series : 6290
  • Cutting Type : One Piece
  • Fuel : Acetylene
  • GSA Approved : Acetylene
  • Heater Type : Medium Preheat
  • Height : 0.9 in
  • Item Length : 3.2 in
  • Item Width : 0.9 in
  • Model Number : 6290
  • Number of Holes : 6
  • Process : OFC
  • Size : 1
Add to quick list
Compare
SEARCH ×