Weldmark

Weldmark WEM 6290-0 Harris Series 6290 One Piece Oxygen Acetylene Cutting Tip Size 0, Cutting Capacity 5/8 Inch

Category Tips & Nozzles
6290-0.HG
Weldmark

Weldmark WEM 6290-0 Harris Series 6290 One Piece Oxygen Acetylene Cutting Tip Size 0, Cutting Capacity 5/8 Inch

Item Code: 6290-0.HG
The Weldmark® by Victor® Acetylene Harris style 6290 series Oxy-Fuel Size 0 Cutting Tip has a 3/8"-5/8" inch cutting capacity. This general purpose Harris 6290 series tip is one piece. It is ideal for hand and machine torch cutting. It is capable of cutting 24-28 inches per minute. It's designed for use with Acetylene. The max Acetylene pressure range is 5-15 and the max oxygen cutting pressure is 40. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.
Category Tips & Nozzles
  • General purpose, Harris style 6290 size 0 for hand and machine torch cutting
  • For use with oxygen and acetylene
  • Speed is 24 to 28 inches per minute
  • Drill size 60
  • Medium preheat
  • Warning: At no time should the withdrawl rate of an individual acetylene cylinder exceed 1/7 of the cylinder contents per hour

Fetching product details


Description

The Weldmark® by Victor® Acetylene Harris style 6290 series Oxy-Fuel Size 0 Cutting Tip has a 3/8"-5/8" inch cutting capacity. This general purpose Harris 6290 series tip is one piece. It is ideal for hand and machine torch cutting. It is capable of cutting 24-28 inches per minute. It's designed for use with Acetylene. The max Acetylene pressure range is 5-15 and the max oxygen cutting pressure is 40. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

Specifications

  • Brand : Weldmark
  • Category : Tips & Nozzles
  • Country of Origin : China
  • Cutting Capacity : .625 in
  • Cutting Tip Material : Copper
  • Cutting Tip Series : 6290
  • Cutting Type : One Piece
  • Fuel : Acetylene
  • Heater Type : Medium Preheat
  • Number of Holes : 6
  • Process : OFC
  • Prop 65 : Yes
  • Size : 0
Add to quick list
Compare
Weldmark

Weldmark WEM 6290-0 Harris Series 6290 One Piece Oxygen Acetylene Cutting Tip Size 0, Cutting Capacity 5/8 Inch

Category Tips & Nozzles
6290-0.HG
Weldmark

Weldmark WEM 6290-0 Harris Series 6290 One Piece Oxygen Acetylene Cutting Tip Size 0, Cutting Capacity 5/8 Inch

Item Code: 6290-0.HG
The Weldmark® by Victor® Acetylene Harris style 6290 series Oxy-Fuel Size 0 Cutting Tip has a 3/8"-5/8" inch cutting capacity. This general purpose Harris 6290 series tip is one piece. It is ideal for hand and machine torch cutting. It is capable of cutting 24-28 inches per minute. It's designed for use with Acetylene. The max Acetylene pressure range is 5-15 and the max oxygen cutting pressure is 40. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.
Category Tips & Nozzles
  • General purpose, Harris style 6290 size 0 for hand and machine torch cutting
  • For use with oxygen and acetylene
  • Speed is 24 to 28 inches per minute
  • Drill size 60
  • Medium preheat
  • Warning: At no time should the withdrawl rate of an individual acetylene cylinder exceed 1/7 of the cylinder contents per hour

Fetching product details


Description

The Weldmark® by Victor® Acetylene Harris style 6290 series Oxy-Fuel Size 0 Cutting Tip has a 3/8"-5/8" inch cutting capacity. This general purpose Harris 6290 series tip is one piece. It is ideal for hand and machine torch cutting. It is capable of cutting 24-28 inches per minute. It's designed for use with Acetylene. The max Acetylene pressure range is 5-15 and the max oxygen cutting pressure is 40. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

Specifications

  • Brand : Weldmark
  • Category : Tips & Nozzles
  • Country of Origin : China
  • Cutting Capacity : .625 in
  • Cutting Tip Material : Copper
  • Cutting Tip Series : 6290
  • Cutting Type : One Piece
  • Fuel : Acetylene
  • Heater Type : Medium Preheat
  • Number of Holes : 6
  • Process : OFC
  • Prop 65 : Yes
  • Size : 0
Add to quick list
Compare
SEARCH ×