Weldmark

Series Airco style 164 Cutting Tip Oxygen/Acetylene One Piece Size: 3

Category Tips & Nozzles
164-3.HG
Weldmark

Series Airco style 164 Cutting Tip Oxygen/Acetylene One Piece Size: 3

Item Code: 164-3.HG
The Weldmark® by Victor® Acetylene Airco® style 164 series Oxy-Fuel Size 3 Cutting Tip has a 1-3/4 inch cutting capacity. This general purpose Airco® series tip is one piece. It is ideal for hand and machine torch cutting on 4700 series machine torches. It is compatible with 3790, 4800, 5700 and 5800 cutting attachments, and is capable of cutting 11-15 inches per minute. It's designed for use with Acetylene, with a max Acetylene pressure of 3 and a max cutting oxygen pressure of 50. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.
Category Tips & Nozzles
  • General purpose, Airco style 164 for hand cutting applications over wide range of plate surface conditions
  • Very heavy preheat, well suited for work requiring heavy preheat such as rusted or heavily painted plate
  • For use with oxygen and acetylene
  • Speed is 11 to 15 inches per minute
  • Drill size 53 (.059)
  • Warning: At no time should the withdrawl rate of an individual acetylene cylinder exceed 1/7 of the cylinder contents per hour

Fetching product details


Description

The Weldmark® by Victor® Acetylene Airco® style 164 series Oxy-Fuel Size 3 Cutting Tip has a 1-3/4 inch cutting capacity. This general purpose Airco® series tip is one piece. It is ideal for hand and machine torch cutting on 4700 series machine torches. It is compatible with 3790, 4800, 5700 and 5800 cutting attachments, and is capable of cutting 11-15 inches per minute. It's designed for use with Acetylene, with a max Acetylene pressure of 3 and a max cutting oxygen pressure of 50. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

Specifications

  • Brand : Weldmark
  • Category : Tips & Nozzles
  • Country of Origin : China
  • Height : 1.000 in
  • Length : 1.000 in
  • Process : OFC
  • Width : 0.900 in
Add to quick list
Compare
Weldmark

Series Airco style 164 Cutting Tip Oxygen/Acetylene One Piece Size: 3

Category Tips & Nozzles
164-3.HG
Weldmark

Series Airco style 164 Cutting Tip Oxygen/Acetylene One Piece Size: 3

Item Code: 164-3.HG
The Weldmark® by Victor® Acetylene Airco® style 164 series Oxy-Fuel Size 3 Cutting Tip has a 1-3/4 inch cutting capacity. This general purpose Airco® series tip is one piece. It is ideal for hand and machine torch cutting on 4700 series machine torches. It is compatible with 3790, 4800, 5700 and 5800 cutting attachments, and is capable of cutting 11-15 inches per minute. It's designed for use with Acetylene, with a max Acetylene pressure of 3 and a max cutting oxygen pressure of 50. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.
Category Tips & Nozzles
  • General purpose, Airco style 164 for hand cutting applications over wide range of plate surface conditions
  • Very heavy preheat, well suited for work requiring heavy preheat such as rusted or heavily painted plate
  • For use with oxygen and acetylene
  • Speed is 11 to 15 inches per minute
  • Drill size 53 (.059)
  • Warning: At no time should the withdrawl rate of an individual acetylene cylinder exceed 1/7 of the cylinder contents per hour

Fetching product details


Description

The Weldmark® by Victor® Acetylene Airco® style 164 series Oxy-Fuel Size 3 Cutting Tip has a 1-3/4 inch cutting capacity. This general purpose Airco® series tip is one piece. It is ideal for hand and machine torch cutting on 4700 series machine torches. It is compatible with 3790, 4800, 5700 and 5800 cutting attachments, and is capable of cutting 11-15 inches per minute. It's designed for use with Acetylene, with a max Acetylene pressure of 3 and a max cutting oxygen pressure of 50. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

Specifications

  • Brand : Weldmark
  • Category : Tips & Nozzles
  • Country of Origin : China
  • Height : 1.000 in
  • Length : 1.000 in
  • Process : OFC
  • Width : 0.900 in
Add to quick list
Compare
SEARCH ×