Weldmark

Weldmark WEM 164-1 Airco Style 164 Oxy-Fuel Cutting Tip One Piece 1 Inch Size Copper Heavy Preheat

Category Tips & Nozzles
164-1.HG
Weldmark

Weldmark WEM 164-1 Airco Style 164 Oxy-Fuel Cutting Tip One Piece 1 Inch Size Copper Heavy Preheat

Item Code: 164-1.HG
The Weldmark® by Victor® Acetylene Airco® style 164 series Oxy-Fuel Size 1 Cutting Tip has a cutting capacity of 1/2 inches. This general purpose Airco® series tip is one piece. It is ideal for hand and machine torch cutting on 4700 series machine torches. It is compatible with 3790, 4800, 5700 and 5800 cutting attachments, and is capable of cutting 17-20 inches per minute. It's designed for use with Acetylene, with a max Acetylene pressure of 3 and a max cutting oxygen pressure of 40. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.
Category Tips & Nozzles
  • General purpose, Airco style 164 for hand cutting applications over wide range of plate surface conditions
  • Very heavy preheat, well suited for work requiring heavy preheat such as rusted or heavily painted plate
  • For use with oxygen and acetylene
  • Speed is 17 to 20 inches per minute
  • Drill size 57 (.043)
  • Warning: At no time should the withdrawl rate of an individual acetylene cylinder exceed 1/7 of the cylinder contents per hour

Fetching product details


Description

The Weldmark® by Victor® Acetylene Airco® style 164 series Oxy-Fuel Size 1 Cutting Tip has a cutting capacity of 1/2 inches. This general purpose Airco® series tip is one piece. It is ideal for hand and machine torch cutting on 4700 series machine torches. It is compatible with 3790, 4800, 5700 and 5800 cutting attachments, and is capable of cutting 17-20 inches per minute. It's designed for use with Acetylene, with a max Acetylene pressure of 3 and a max cutting oxygen pressure of 40. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

Specifications

  • Brand : Weldmark
  • Category : Tips & Nozzles
  • Country of Origin : China
  • Cutting Capacity : .5 in
  • Cutting Tip Series : Airco 164
  • Cutting Type : One Piece
  • Fuel : Acetylene
  • Heater Type : Heavy
  • Height : 1 in
  • Maximum Operating Pressure : 3 psig
  • Number of Holes : 6
Add to quick list
Compare
Weldmark

Weldmark WEM 164-1 Airco Style 164 Oxy-Fuel Cutting Tip One Piece 1 Inch Size Copper Heavy Preheat

Category Tips & Nozzles
164-1.HG
Weldmark

Weldmark WEM 164-1 Airco Style 164 Oxy-Fuel Cutting Tip One Piece 1 Inch Size Copper Heavy Preheat

Item Code: 164-1.HG
The Weldmark® by Victor® Acetylene Airco® style 164 series Oxy-Fuel Size 1 Cutting Tip has a cutting capacity of 1/2 inches. This general purpose Airco® series tip is one piece. It is ideal for hand and machine torch cutting on 4700 series machine torches. It is compatible with 3790, 4800, 5700 and 5800 cutting attachments, and is capable of cutting 17-20 inches per minute. It's designed for use with Acetylene, with a max Acetylene pressure of 3 and a max cutting oxygen pressure of 40. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.
Category Tips & Nozzles
  • General purpose, Airco style 164 for hand cutting applications over wide range of plate surface conditions
  • Very heavy preheat, well suited for work requiring heavy preheat such as rusted or heavily painted plate
  • For use with oxygen and acetylene
  • Speed is 17 to 20 inches per minute
  • Drill size 57 (.043)
  • Warning: At no time should the withdrawl rate of an individual acetylene cylinder exceed 1/7 of the cylinder contents per hour

Fetching product details


Description

The Weldmark® by Victor® Acetylene Airco® style 164 series Oxy-Fuel Size 1 Cutting Tip has a cutting capacity of 1/2 inches. This general purpose Airco® series tip is one piece. It is ideal for hand and machine torch cutting on 4700 series machine torches. It is compatible with 3790, 4800, 5700 and 5800 cutting attachments, and is capable of cutting 17-20 inches per minute. It's designed for use with Acetylene, with a max Acetylene pressure of 3 and a max cutting oxygen pressure of 40. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

Specifications

  • Brand : Weldmark
  • Category : Tips & Nozzles
  • Country of Origin : China
  • Cutting Capacity : .5 in
  • Cutting Tip Series : Airco 164
  • Cutting Type : One Piece
  • Fuel : Acetylene
  • Heater Type : Heavy
  • Height : 1 in
  • Maximum Operating Pressure : 3 psig
  • Number of Holes : 6
Add to quick list
Compare
SEARCH ×