4-3-101.HG

Weldmark WEM 4-3-101 Series 3-101 One Piece Oxygen Acetylene Cutting Tip 3 Inch Capacity Copper

Item Code: 4-3-101.HG

The Weldmark® by Victor® Oxygen/Acetylene 3-101 series Oxy-Fuel Size 4 Cutting Tip has a 3 inch cutting capacity. This general purpose 3-101 series tip is one piece. It is ideal for hand and machine torch cutting. It is compatible with CA1350/51/52, CA1260 and CA411-3 cutting attachments, and is capable of cutting 9-12 inches per minute with an average kerf width of 0.12". It's designed for use with Acetylene. The max Acetylene pressure is 10 and the max oxygen cutting pressure is 50. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

Category Tips & Nozzles

General purpose, Victor style 3-101 size 4 for hand and machine cutting torch
For use with oxygen and acetylene
Speed is 9 to 12 inches per minute
Kerf width is .12"
Cutting oxygen orifice size is .083"
Warning: At no time should the withdrawl rate of an individual acetylene cylinder exceed 1/7 of the cylinder contents per hour

Description

The Weldmark® by Victor® Oxygen/Acetylene 3-101 series Oxy-Fuel Size 4 Cutting Tip has a 3 inch cutting capacity. This general purpose 3-101 series tip is one piece. It is ideal for hand and machine torch cutting. It is compatible with CA1350/51/52, CA1260 and CA411-3 cutting attachments, and is capable of cutting 9-12 inches per minute with an average kerf width of 0.12". It's designed for use with Acetylene. The max Acetylene pressure is 10 and the max oxygen cutting pressure is 50. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

Weldmark WEM 4-3-101 Series 3-101 One Piece Oxygen Acetylene Cutting Tip 3 Inch Capacity Copper

Item Code: 4-3-101.HG

The Weldmark® by Victor® Oxygen/Acetylene 3-101 series Oxy-Fuel Size 4 Cutting Tip has a 3 inch cutting capacity. This general purpose 3-101 series tip is one piece. It is ideal for hand and machine torch cutting. It is compatible with CA1350/51/52, CA1260 and CA411-3 cutting attachments, and is capable of cutting 9-12 inches per minute with an average kerf width of 0.12". It's designed for use with Acetylene. The max Acetylene pressure is 10 and the max oxygen cutting pressure is 50. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

Category Tips & Nozzles

General purpose, Victor style 3-101 size 4 for hand and machine cutting torch
For use with oxygen and acetylene
Speed is 9 to 12 inches per minute
Kerf width is .12"
Cutting oxygen orifice size is .083"
Warning: At no time should the withdrawl rate of an individual acetylene cylinder exceed 1/7 of the cylinder contents per hour

Description

The Weldmark® by Victor® Oxygen/Acetylene 3-101 series Oxy-Fuel Size 4 Cutting Tip has a 3 inch cutting capacity. This general purpose 3-101 series tip is one piece. It is ideal for hand and machine torch cutting. It is compatible with CA1350/51/52, CA1260 and CA411-3 cutting attachments, and is capable of cutting 9-12 inches per minute with an average kerf width of 0.12". It's designed for use with Acetylene. The max Acetylene pressure is 10 and the max oxygen cutting pressure is 50. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

SEARCH ×

Items ()

Item	Description	Item Code	Qty
	Product Name {{product.name}}	Item Code {{product.sku}}

Clear All

Details

{{product.brand_name}}

{{product.item_name}}

Item Code: {{product.item_sku}} Original SKU: {{product.original_sku}}

Customer Product Code : {{product.customer_product_code}}

Category {{product.category_name}}

Maximum order quantity {{ product.item_maximum_order }}

{{ product.display_uom_price }} / {{ product.display_uom }}

{{attribute.name}}

{{attribute.value}}

{{attribute.name}}

{{attribute.value}}

${{product.item_name}}$

{{{product.item_description}}}

{{selling_point}}

	Location	Stock
	{{location.warehouse}}	{{location.quantity}}

Want To Swap ?

{{reason}}

${{product.item_name}}$

{{product.item_name}}

Item Code: {{product.item_sku}}

Maximum order quantity {{ product.item_maximum_order }}

Call for price

- +

{{reason}}

${{selectproduct.item_name}}$

{{selectproduct.item_name}}

Item Code: {{ selectproduct.item_sku }}

Maximum order quantity {{ selectproduct.item_maximum_order }}

Call for price

- +