3-1-101.HG

Series 1-101 Cutting Tip Oxygen/Acetylene One Piece Size: 3

Item Code: 3-1-101.HG

The Weldmark® by Victor® Oxygen/Acetylene 1-101 series Oxy-Fuel Size 3 Cutting Tip has a 2-1/2 inch cutting capacity. This general purpose 1-101 series tip is one piece. It is ideal for hand and machine torch cutting. It is compatible with CA2460/61/62 and CA411-1 cutting attachments, and is capable of cutting 10-15 inches per minute with an average kerf width of 0.11". It's designed for use with Acetylene. It has a max Acetylene pressure of 10 and a max oxygen cutting pressure of 50. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

Category Tips & Nozzles

General purpose, Victor style 1-101 size 3 for hand and machine torch cutting
For use with oxygen and acetylene
Maximum durability with precision cutting
Speed is 10 to 15 inches per minute
Kerf width is .11"
Cutting oxygen orifice size is .071"

Description

The Weldmark® by Victor® Oxygen/Acetylene 1-101 series Oxy-Fuel Size 3 Cutting Tip has a 2-1/2 inch cutting capacity. This general purpose 1-101 series tip is one piece. It is ideal for hand and machine torch cutting. It is compatible with CA2460/61/62 and CA411-1 cutting attachments, and is capable of cutting 10-15 inches per minute with an average kerf width of 0.11". It's designed for use with Acetylene. It has a max Acetylene pressure of 10 and a max oxygen cutting pressure of 50. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

Series 1-101 Cutting Tip Oxygen/Acetylene One Piece Size: 3

Item Code: 3-1-101.HG

The Weldmark® by Victor® Oxygen/Acetylene 1-101 series Oxy-Fuel Size 3 Cutting Tip has a 2-1/2 inch cutting capacity. This general purpose 1-101 series tip is one piece. It is ideal for hand and machine torch cutting. It is compatible with CA2460/61/62 and CA411-1 cutting attachments, and is capable of cutting 10-15 inches per minute with an average kerf width of 0.11". It's designed for use with Acetylene. It has a max Acetylene pressure of 10 and a max oxygen cutting pressure of 50. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

Category Tips & Nozzles

General purpose, Victor style 1-101 size 3 for hand and machine torch cutting
For use with oxygen and acetylene
Maximum durability with precision cutting
Speed is 10 to 15 inches per minute
Kerf width is .11"
Cutting oxygen orifice size is .071"

Description

The Weldmark® by Victor® Oxygen/Acetylene 1-101 series Oxy-Fuel Size 3 Cutting Tip has a 2-1/2 inch cutting capacity. This general purpose 1-101 series tip is one piece. It is ideal for hand and machine torch cutting. It is compatible with CA2460/61/62 and CA411-1 cutting attachments, and is capable of cutting 10-15 inches per minute with an average kerf width of 0.11". It's designed for use with Acetylene. It has a max Acetylene pressure of 10 and a max oxygen cutting pressure of 50. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

SEARCH ×

Items ()

Item	Description	Item Code	Qty
	Product Name {{product.name}}	Item Code {{product.sku}}

Clear All

Details

{{product.brand_name}}

{{product.item_name}}

Item Code: {{product.item_sku}} Original SKU: {{product.original_sku}}

Customer Product Code : {{product.customer_product_code}}

Category {{product.category_name}}

Maximum order quantity {{ product.item_maximum_order }}

{{ product.display_uom_price }} / {{ product.display_uom }}

{{attribute.name}}

{{attribute.value}}

{{attribute.name}}

{{attribute.value}}

${{product.item_name}}$

{{{product.item_description}}}

{{selling_point}}

	Location	Stock
	{{location.warehouse}}	{{location.quantity}}

Want To Swap ?

{{reason}}

${{product.item_name}}$

{{product.item_name}}

Item Code: {{product.item_sku}}

Maximum order quantity {{ product.item_maximum_order }}

Call for price

- +

{{reason}}

${{selectproduct.item_name}}$

{{selectproduct.item_name}}

Item Code: {{ selectproduct.item_sku }}

Maximum order quantity {{ selectproduct.item_maximum_order }}

Call for price

- +