6-GPN.HG

Series 1-GPN Cutting Tip Oxygen/Natural Gas, Propane Two Piece with Spline Insert Size: 6

Item Code: 6-GPN.HG

The Weldmark® by Victor® 1-GPN series Oxy-Fuel Size 6 Cutting Tip has a 8 inch cutting capacity. This general purpose 1-GPN series tip is two pieces with a spline insert. It is ideal for hand and machine torch cutting. It is compatible with CA2460/61/62 and CA411-1 cutting attachments, and is capable of cutting 4-7 inches per minute with an average kerf width of 0.17-0.18". It's designed for use with Natural Gas or Propane. The max Propane pressure is 15 and the max oxygen cutting pressure is 65. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

Category Tips & Nozzles

General purpose, Victor style 1-GPN size 6 for hand and machine torch cutting
For use with oxygen, propane or natural gas
Maximum durability with precision cutting
Speed is 4 to 7 inches per minute
Kerf width is .17" /.18"
For best results use ST2600FC series torches and 3/8" ID hose when using tip size 6 or larger

Description

The Weldmark® by Victor® 1-GPN series Oxy-Fuel Size 6 Cutting Tip has a 8 inch cutting capacity. This general purpose 1-GPN series tip is two pieces with a spline insert. It is ideal for hand and machine torch cutting. It is compatible with CA2460/61/62 and CA411-1 cutting attachments, and is capable of cutting 4-7 inches per minute with an average kerf width of 0.17-0.18". It's designed for use with Natural Gas or Propane. The max Propane pressure is 15 and the max oxygen cutting pressure is 65. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

Series 1-GPN Cutting Tip Oxygen/Natural Gas, Propane Two Piece with Spline Insert Size: 6

Item Code: 6-GPN.HG

The Weldmark® by Victor® 1-GPN series Oxy-Fuel Size 6 Cutting Tip has a 8 inch cutting capacity. This general purpose 1-GPN series tip is two pieces with a spline insert. It is ideal for hand and machine torch cutting. It is compatible with CA2460/61/62 and CA411-1 cutting attachments, and is capable of cutting 4-7 inches per minute with an average kerf width of 0.17-0.18". It's designed for use with Natural Gas or Propane. The max Propane pressure is 15 and the max oxygen cutting pressure is 65. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

Category Tips & Nozzles

General purpose, Victor style 1-GPN size 6 for hand and machine torch cutting
For use with oxygen, propane or natural gas
Maximum durability with precision cutting
Speed is 4 to 7 inches per minute
Kerf width is .17" /.18"
For best results use ST2600FC series torches and 3/8" ID hose when using tip size 6 or larger

Description

The Weldmark® by Victor® 1-GPN series Oxy-Fuel Size 6 Cutting Tip has a 8 inch cutting capacity. This general purpose 1-GPN series tip is two pieces with a spline insert. It is ideal for hand and machine torch cutting. It is compatible with CA2460/61/62 and CA411-1 cutting attachments, and is capable of cutting 4-7 inches per minute with an average kerf width of 0.17-0.18". It's designed for use with Natural Gas or Propane. The max Propane pressure is 15 and the max oxygen cutting pressure is 65. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.

SEARCH ×

Items ()

Item	Description	Item Code	Qty
	Product Name {{product.name}}	Item Code {{product.sku}}

Clear All

Details

{{product.brand_name}}

{{product.item_name}}

Item Code: {{product.item_sku}} Original SKU: {{product.original_sku}}

Customer Product Code : {{product.customer_product_code}}

Category {{product.category_name}}

Maximum order quantity {{ product.item_maximum_order }}

{{ product.display_uom_price }} / {{ product.display_uom }}

{{attribute.name}}

{{attribute.value}}

{{attribute.name}}

{{attribute.value}}

${{product.item_name}}$

{{{product.item_description}}}

{{selling_point}}

	Location	Stock
	{{location.warehouse}}	{{location.quantity}}

Want To Swap ?

{{reason}}

${{product.item_name}}$

{{product.item_name}}

Item Code: {{product.item_sku}}

Maximum order quantity {{ product.item_maximum_order }}

Call for price

- +

{{reason}}

${{selectproduct.item_name}}$

{{selectproduct.item_name}}

Item Code: {{ selectproduct.item_sku }}

Maximum order quantity {{ selectproduct.item_maximum_order }}

Call for price

- +