1501430.HG

Model 6290-5VVC Machine Cutting Tip

Item Code: 1501430.HG

Model 6290-VVC high-speed propane/natural gas machine cutting tip with an electroless nickel-plated shell (.088 cup depth). This tip maximizes kerf while increasing cutting speeds to reduce heat input. The tip produces high-quality cuts thus reducing afterwork. The 6290-VVC tip is used with low-cost fuel gases. Model 6290-VVC high-speed propane/natural gas machine cutting tip with an electroless nickel-plated shell (.088 cup depth). This tip maximizes kerf while increasing cutting speeds to reduce heat input. The tip produces high-quality cuts thus reducing afterwork. The 6290-VVC tip is used with low-cost fuel gases. Use next size larger tip with same PSIG for contour or intricate cutting. For thin plate cutting use a highly carburizing preheat flame. Measure cutting oxygen pressures at torch entry. When using two hose machine torches, set oxygen pressure at cutting oxygen PSIG.

Category Tips & Nozzles

Two-piece machine cutting tip
Electroless nickel-plated outer shell and brass internal shell construction (.088 cup depth)
Premium high-speed
Minimizes kerf
Increased cutting speed reduces heat input
High quality cuts, reduce afterwork

Description

Model 6290-VVC high-speed propane/natural gas machine cutting tip with an electroless nickel-plated shell (.088 cup depth). This tip maximizes kerf while increasing cutting speeds to reduce heat input. The tip produces high-quality cuts thus reducing afterwork. The 6290-VVC tip is used with low-cost fuel gases. Model 6290-VVC high-speed propane/natural gas machine cutting tip with an electroless nickel-plated shell (.088 cup depth). This tip maximizes kerf while increasing cutting speeds to reduce heat input. The tip produces high-quality cuts thus reducing afterwork. The 6290-VVC tip is used with low-cost fuel gases. Use next size larger tip with same PSIG for contour or intricate cutting. For thin plate cutting use a highly carburizing preheat flame. Measure cutting oxygen pressures at torch entry. When using two hose machine torches, set oxygen pressure at cutting oxygen PSIG.

Model 6290-5VVC Machine Cutting Tip

Item Code: 1501430.HG

Model 6290-VVC high-speed propane/natural gas machine cutting tip with an electroless nickel-plated shell (.088 cup depth). This tip maximizes kerf while increasing cutting speeds to reduce heat input. The tip produces high-quality cuts thus reducing afterwork. The 6290-VVC tip is used with low-cost fuel gases. Model 6290-VVC high-speed propane/natural gas machine cutting tip with an electroless nickel-plated shell (.088 cup depth). This tip maximizes kerf while increasing cutting speeds to reduce heat input. The tip produces high-quality cuts thus reducing afterwork. The 6290-VVC tip is used with low-cost fuel gases. Use next size larger tip with same PSIG for contour or intricate cutting. For thin plate cutting use a highly carburizing preheat flame. Measure cutting oxygen pressures at torch entry. When using two hose machine torches, set oxygen pressure at cutting oxygen PSIG.

Category Tips & Nozzles

Two-piece machine cutting tip
Electroless nickel-plated outer shell and brass internal shell construction (.088 cup depth)
Premium high-speed
Minimizes kerf
Increased cutting speed reduces heat input
High quality cuts, reduce afterwork

Description

Model 6290-VVC high-speed propane/natural gas machine cutting tip with an electroless nickel-plated shell (.088 cup depth). This tip maximizes kerf while increasing cutting speeds to reduce heat input. The tip produces high-quality cuts thus reducing afterwork. The 6290-VVC tip is used with low-cost fuel gases. Model 6290-VVC high-speed propane/natural gas machine cutting tip with an electroless nickel-plated shell (.088 cup depth). This tip maximizes kerf while increasing cutting speeds to reduce heat input. The tip produces high-quality cuts thus reducing afterwork. The 6290-VVC tip is used with low-cost fuel gases. Use next size larger tip with same PSIG for contour or intricate cutting. For thin plate cutting use a highly carburizing preheat flame. Measure cutting oxygen pressures at torch entry. When using two hose machine torches, set oxygen pressure at cutting oxygen PSIG.

SEARCH ×

Items ()

Item	Description	Item Code	Qty
	Product Name {{product.name}}	Item Code {{product.sku}}

Clear All

Details

{{product.brand_name}}

{{product.item_name}}

Item Code: {{product.item_sku}} Original SKU: {{product.original_sku}}

Customer Product Code : {{product.customer_product_code}}

Category {{product.category_name}}

Maximum order quantity {{ product.item_maximum_order }}

{{ product.display_uom_price }} / {{ product.display_uom }}

{{attribute.name}}

{{attribute.value}}

{{attribute.name}}

{{attribute.value}}

${{product.item_name}}$

{{{product.item_description}}}

{{selling_point}}

	Location	Stock
	{{location.warehouse}}	{{location.quantity}}

Want To Swap ?

{{reason}}

${{product.item_name}}$

{{product.item_name}}

Item Code: {{product.item_sku}}

Maximum order quantity {{ product.item_maximum_order }}

Call for price

- +

{{reason}}

${{selectproduct.item_name}}$

{{selectproduct.item_name}}

Item Code: {{ selectproduct.item_sku }}

Maximum order quantity {{ selectproduct.item_maximum_order }}

Call for price

- +