015FC30.HG

Harris® 15 low-fuming bronze flux-coated white brazing alloy 1/16 x 18 in. x 5 lb. tube

Item Code: 015FC30.HG

Harris® 15 low-fuming bronze flux-coated white brazing alloy 1/16 x 18 in. x 5 lb. Tube. Harris® 15 low fuming bronze (LFB) flux-coated is considered a “braze-weld” alloy as this copper/zinc alloy exhibits minimal capillary action during brazing. This limits joint design primarily to lap, tee, and butt joints. Butt joints require some edge preparation typically incorporating beveled edges to provide a location for filler metal to be applied and to ensure alloy penetration to the joint root. LFB was developed primarily to braze steel and some cast iron grades including malleable and gray iron. It can be used to join copper but due to its elevated melting temperature care must be taken during brazing to avoid overheating or melting the copper. It is used with the oxy-fuel process. This alloy is flux-coated, eliminating the need for manual flux application.

Category Maintenance Alloy

Minimum quantity 10

Copper-zinc braze-welding flux-coated rod using oxy-fuel
Flux coating provides excellent wetting action with no objectionable fuming
Exhibits minimal capillary action during brazing
Limited joint designs to lap, tee and butt joints, although butt joints require some edge preparation
Good machinability
Produces porosity-free deposits

Description

Harris® 15 low-fuming bronze flux-coated white brazing alloy 1/16 x 18 in. x 5 lb. Tube. Harris® 15 low fuming bronze (LFB) flux-coated is considered a “braze-weld” alloy as this copper/zinc alloy exhibits minimal capillary action during brazing. This limits joint design primarily to lap, tee, and butt joints. Butt joints require some edge preparation typically incorporating beveled edges to provide a location for filler metal to be applied and to ensure alloy penetration to the joint root. LFB was developed primarily to braze steel and some cast iron grades including malleable and gray iron. It can be used to join copper but due to its elevated melting temperature care must be taken during brazing to avoid overheating or melting the copper. It is used with the oxy-fuel process. This alloy is flux-coated, eliminating the need for manual flux application.

Harris® 15 low-fuming bronze flux-coated white brazing alloy 1/16 x 18 in. x 5 lb. tube

Item Code: 015FC30.HG

Harris® 15 low-fuming bronze flux-coated white brazing alloy 1/16 x 18 in. x 5 lb. Tube. Harris® 15 low fuming bronze (LFB) flux-coated is considered a “braze-weld” alloy as this copper/zinc alloy exhibits minimal capillary action during brazing. This limits joint design primarily to lap, tee, and butt joints. Butt joints require some edge preparation typically incorporating beveled edges to provide a location for filler metal to be applied and to ensure alloy penetration to the joint root. LFB was developed primarily to braze steel and some cast iron grades including malleable and gray iron. It can be used to join copper but due to its elevated melting temperature care must be taken during brazing to avoid overheating or melting the copper. It is used with the oxy-fuel process. This alloy is flux-coated, eliminating the need for manual flux application.

Category Maintenance Alloy

Minimum quantity 10

Copper-zinc braze-welding flux-coated rod using oxy-fuel
Flux coating provides excellent wetting action with no objectionable fuming
Exhibits minimal capillary action during brazing
Limited joint designs to lap, tee and butt joints, although butt joints require some edge preparation
Good machinability
Produces porosity-free deposits

Description

Harris® 15 low-fuming bronze flux-coated white brazing alloy 1/16 x 18 in. x 5 lb. Tube. Harris® 15 low fuming bronze (LFB) flux-coated is considered a “braze-weld” alloy as this copper/zinc alloy exhibits minimal capillary action during brazing. This limits joint design primarily to lap, tee, and butt joints. Butt joints require some edge preparation typically incorporating beveled edges to provide a location for filler metal to be applied and to ensure alloy penetration to the joint root. LFB was developed primarily to braze steel and some cast iron grades including malleable and gray iron. It can be used to join copper but due to its elevated melting temperature care must be taken during brazing to avoid overheating or melting the copper. It is used with the oxy-fuel process. This alloy is flux-coated, eliminating the need for manual flux application.

SEARCH ×

Items ()

Item	Description	Item Code	Qty
	Product Name {{product.name}}	Item Code {{product.sku}}

Clear All

Details

{{product.brand_name}}

{{product.item_name}}

Item Code: {{product.item_sku}} Original SKU: {{product.original_sku}}

Customer Product Code : {{product.customer_product_code}}

Category {{product.category_name}}

Maximum order quantity {{ product.item_maximum_order }}

{{ product.display_uom_price }} / {{ product.display_uom }}

{{attribute.name}}

{{attribute.value}}

{{attribute.name}}

{{attribute.value}}

${{product.item_name}}$

{{{product.item_description}}}

{{selling_point}}

	Location	Stock
	{{location.warehouse}}	{{location.quantity}}

Want To Swap ?

{{reason}}

${{product.item_name}}$

{{product.item_name}}

Item Code: {{product.item_sku}}

Maximum order quantity {{ product.item_maximum_order }}

Call for price

- +

{{reason}}

${{selectproduct.item_name}}$

{{selectproduct.item_name}}

Item Code: {{ selectproduct.item_sku }}

Maximum order quantity {{ selectproduct.item_maximum_order }}

Call for price

- +