Weldmark

Weldmark®Flap Disc Type 29 Standard Zirconia 60 grit Medium Sanding Grade Smooth finish 5 x 7/8

Category Flap Discs
WEM 06448.HG
Weldmark

Weldmark®Flap Disc Type 29 Standard Zirconia 60 grit Medium Sanding Grade Smooth finish 5 x 7/8

Item Code: WEM 06448.HG
The Weldmark by Norton® 5 inch diameter, type 29, angled abrasive flap disc is best when used for applications like beveling, blending, deburring, and stock removal of 300 and 400 series stainless steel, cast iron, soft carbon steel, super alloys, and titanium. Constructed with a cloth backed, standard density zirconia coated 60 grit, medium grade surface, for a smooth finish. Has a 7/8 inch unthreaded arbor hole, used with a right angle grinder, and max rated for 12000 RPM. Meets or exceeds ANSI safety standards.
Category Flap Discs
  • Type 29 conical flap discs with durable zirconia grain provide good cut and life for all-purpose work
  • Angled, polyester/cotton flaps provide greater surface contact and are the best choice when speed of job completion and stock removal are primary considerations; may be used on contour and edge work
  • Fiberglass/resin backing plates are the most popular plate configuration due to high strength, light weight, ability to absorb vibration, and operator comfort
  • Good choice for coarse grit blending, deburring, and stock removal
  • Medium 60 grit for blending and deburring

Fetching product details


Description

The Weldmark by Norton® 5 inch diameter, type 29, angled abrasive flap disc is best when used for applications like beveling, blending, deburring, and stock removal of 300 and 400 series stainless steel, cast iron, soft carbon steel, super alloys, and titanium. Constructed with a cloth backed, standard density zirconia coated 60 grit, medium grade surface, for a smooth finish. Has a 7/8 inch unthreaded arbor hole, used with a right angle grinder, and max rated for 12000 RPM. Meets or exceeds ANSI safety standards.

Specifications

  • Abrasive Type : Coated
  • Arbor Hole : 0.875 in
  • Brand : Weldmark
  • Category : Flap Discs
  • Color : Blue
  • Country of Origin : Mexico
  • Diameter : 127.000 mm
  • Grit : 60
  • Length : 127.000 mm
  • Max. RPM : 12000 RPM
  • Width : 127.000 cm
Add to quick list
Compare
Weldmark

Weldmark®Flap Disc Type 29 Standard Zirconia 60 grit Medium Sanding Grade Smooth finish 5 x 7/8

Category Flap Discs
WEM 06448.HG
Weldmark

Weldmark®Flap Disc Type 29 Standard Zirconia 60 grit Medium Sanding Grade Smooth finish 5 x 7/8

Item Code: WEM 06448.HG
The Weldmark by Norton® 5 inch diameter, type 29, angled abrasive flap disc is best when used for applications like beveling, blending, deburring, and stock removal of 300 and 400 series stainless steel, cast iron, soft carbon steel, super alloys, and titanium. Constructed with a cloth backed, standard density zirconia coated 60 grit, medium grade surface, for a smooth finish. Has a 7/8 inch unthreaded arbor hole, used with a right angle grinder, and max rated for 12000 RPM. Meets or exceeds ANSI safety standards.
Category Flap Discs
  • Type 29 conical flap discs with durable zirconia grain provide good cut and life for all-purpose work
  • Angled, polyester/cotton flaps provide greater surface contact and are the best choice when speed of job completion and stock removal are primary considerations; may be used on contour and edge work
  • Fiberglass/resin backing plates are the most popular plate configuration due to high strength, light weight, ability to absorb vibration, and operator comfort
  • Good choice for coarse grit blending, deburring, and stock removal
  • Medium 60 grit for blending and deburring

Fetching product details


Description

The Weldmark by Norton® 5 inch diameter, type 29, angled abrasive flap disc is best when used for applications like beveling, blending, deburring, and stock removal of 300 and 400 series stainless steel, cast iron, soft carbon steel, super alloys, and titanium. Constructed with a cloth backed, standard density zirconia coated 60 grit, medium grade surface, for a smooth finish. Has a 7/8 inch unthreaded arbor hole, used with a right angle grinder, and max rated for 12000 RPM. Meets or exceeds ANSI safety standards.

Specifications

  • Abrasive Type : Coated
  • Arbor Hole : 0.875 in
  • Brand : Weldmark
  • Category : Flap Discs
  • Color : Blue
  • Country of Origin : Mexico
  • Diameter : 127.000 mm
  • Grit : 60
  • Length : 127.000 mm
  • Max. RPM : 12000 RPM
  • Width : 127.000 cm
Add to quick list
Compare
SEARCH ×